Meta Advantage+ Settings: What's On by Default and the Few Worth Changing (2026)
Advantage+ starts on in Sales, Leads and App campaigns. What turns it off, five defaults that deliver past the limits you set, and the ad-level switches to check.

In Sales, Leads and App promotion campaigns, Meta Advantage+ is on before you touch anything: campaign budget, Advantage+ audience and Advantage+ placements come preselected, and narrowing any one of them flips the label to off. After going through Meta's documentation, we think the label is the wrong thing to watch. Leave those three sections alone unless you have a constraint you can name, switch off the five defaults that deliver past the limits you set, and spend the rest of your setup time at the ad level, where Meta changes what your ad looks like and says.
What turns the Advantage+ label on and off
For those three objectives, Ads Manager no longer asks you to pick a manual or an Advantage+ campaign. Advantage+ is a state worked out from three sections, and the label in the top right reports it. Meta lists the rules on its What turns Advantage+ on and Advantage+ off page. The panel runs through them; tap any option to try it.
New campaign
Sales objective
All three sections on
Budget
Advantage+ onAudience
Advantage+ onPlacements
Advantage+ onThe green options are the useful part. You can cap spend per ad set, raise the minimum age as high as 25, exclude a custom audience or set account controls, and the label stays on. Those limits hold, which is why we put real constraints there instead of narrowing the audience. Account controls live in Advertising settings, apply to every campaign in the account, and cover locations, minimum age, brand-safety exclusions and a few placements, Audience Network and the Facebook right column among them.
Two older habits don't survive this setup. Advantage+ shopping campaigns are now Advantage+ sales campaigns, which is any Sales campaign with all three sections on. And the existing customer budget cap that many guides still teach is gone. Meta says it "is no longer available" and suggests excluding a customer custom audience instead, which keeps the label on.
Five defaults that deliver past the limits you set
Narrowing a section turns the label off, but it doesn't mean Meta stops at the line you drew. In five places, Meta's help pages describe a default that delivers beyond a limit you set. Four have an off switch, usually a click deeper than the limit itself. One has none.
You set a limit
Five defaults that let Meta deliver past it
No opt-out on conversion, link click and similar goals
The one without a switch matters most if you sell online. Meta treats detailed targeting as "audience suggestions by default", and if you optimize for conversions, link clicks, landing page views, conversations, app events, app installs or value, it applies Advantage+ detailed targeting "with no option to opt out". On those goals your interests tell Meta where to start looking, and that's all. We listed which interests exist and how big they are separately.
The placement default is the one that surprises people. Exclude Audience Network and Meta says it will "aim to spend around 5% of your budget on each excluded placement" when it expects that to help; the campaign setup page says up to 5%. Eligible advertisers are opted in the moment they exclude something. If an exclusion has to be absolute, untick it under Manage excluded placements, or use the account-level placement control, which keeps Advantage+ on. Meta doesn't say whether the 5% applies to account exclusions too.
The lookalike, location and device expansions are on by default in the cases shown above, and each goes off with one checkbox. We'd only turn one off when the limit is the point of the ad set: a lookalike percentage you're testing, a service area you actually cover, an app that only runs on iOS.
The ad level is where Meta changes your ad
Everything so far decides who sees the ad. The ad-level switches decide what they see, and Meta's wording gets looser here: "Some enhancements may be turned on by default", and the media and text you upload "may be adjusted to help improve ad performance while maintaining the core message of your campaign." Meta doesn't publish which ones start on for a given ad. These are the documented switches for a single image ad, applied to one of ours.
One single-image ad
What you uploaded, and what Meta may show
AI-expanded to 4:5voyant Two weeks of packing in a carry-on. Pack VOYANT.
Size guide on voyant.comWarranty on voyant.com
Summary A hard-shell carry-on sized for longer trips.
More from other businesses
7 of 7 switched on
For your own ad, the answer is in two places. Review defaults, next to Advanced preview in the creation flow, lists the creative features that are on by default for that ad. Then open the Advantage+ creative tab inside Advanced preview, because Meta says some enhancements "can only be turned off in Advanced preview". Clearing the toggles in the creative setup alone can leave some on.
Two switches reach past the ad you're editing. Ad sources, such as website highlights, products and promotions, are the one setting that remembers: opt out once and that "applies to all future ads you create in that ad account." Multi-advertiser ads go the other way. Meta says they "may be turned on automatically for existing ads unless ads were explicitly opted out", and boosted posts are opted in. The checkbox is in the ad's Ad setup, and you can bulk edit it from the Ads tab.
On which enhancements to keep, here's practitioner advice rather than Meta's. SparkUGC's August 2026 guide keeps visual touch-ups and relevant comments and turns off text improvements, overlays, music, animation and the generative features until they've been tested on the account. TribeUp says multi-advertiser ads are worth turning off for most advertisers. We agree on anything that rewrites your words: see the preview before it runs. Advantage+ creative can also make versions of your image with new headline text, which we covered when Meta started rewriting text on ad images.
Turning off visual touch-ups means Meta stops cropping and expanding for you, while flex media may still serve a 9:16 image in Feed. Either way, each placement needs a file that works at its size. Before you lean on one tall asset, check a 9:16 asset against Feed and Reels safe zones. Here's which AI tools to pay for on top of Advantage+.



If Meta isn't resizing your images, you need each size yourself. AdMakeAI's image ad tool makes a batch of variations from one brief in 1:1, 4:5 and 9:16.
Make every sizeMeta Advantage+ FAQ
What is Meta Advantage+?
Meta's name for its automation settings: end-to-end setups for Sales, App promotion and Leads campaigns, plus single switches for budget, audience, placements, creative and catalog. In those three objectives they start on.
How do I turn off Advantage+ audience?
In the ad set's Audience section, choose Further limit the reach of your ads and uncheck Use as a suggestion. The campaign then shows Advantage+ off.
How do I turn off Advantage+ creative enhancements?
Turn them off in the ad's creative setup, then check the Advantage+ creative tab in Advanced preview, where some can only be turned off. For live ads, bulk edit from the Ads tab.
What happened to Advantage+ shopping campaigns?
Meta renamed them Advantage+ sales campaigns in 2025. Any Sales campaign with campaign budget, Advantage+ audience and Advantage+ placements on is one, and the existing customer budget cap is gone.
Is Advantage+ the same as Andromeda?
No. Advantage+ is the settings you choose. Andromeda is Meta's ad retrieval system and has no setting. Here's what Meta has published about Andromeda.
Before you publish an Advantage+ campaign
- 1Leave campaign budget, Advantage+ audience and Advantage+ placements on unless you can name the reason to narrow one.
- 2Put hard limits (countries, minimum age, brand-safety exclusions) in Advertising settings under Audience controls. They apply to every campaign and keep Advantage+ on.
- 3Exclude past customers with a custom audience exclusion. The old customer budget cap is gone.
- 4Excluded a placement? Open Manage excluded placements and decide on Allow limited spend.
- 5Picked a city, restricted devices or added a lookalike? Turn off the matching expansion if the limit is the point.
- 6Before each ad goes out, open Review defaults, then the Advantage+ creative tab in Advanced preview. Turn off anything that rewrites your copy until you've seen it.
- 7Uncheck Multi-advertiser ads if you don't want other brands next to yours, and turn off ad sources you don't want once for the whole account.
How we got this
The UI labels and defaults here come from Meta's Business Help Center and Instagram Help Center, read October 10, 2026, not from our own Ads Manager screenshots; we had no Ads Manager access for this post. Meta rolls these features out gradually, so your account may show something different. The panels are our diagrams of the rules Meta documents. Practitioner advice is from SparkUGC (August 4, 2026) and TribeUp (September 18, 2026).
Make your next ad from what already runs
Research what competitors are running, then generate your own on-brand ads in minutes.